Voci con l'etichetta :
Chiudi
Changelog
Chiudi
Centro assistenza
Control Panel

Connecting third-party storages

Control Panelv.2.7 Control Panel changelog

Version 2.7

Release date: 04/25/2019

LDAP

  • Added more fields mapped for the users loaded via LDAP: user photo, birthday, contacts, primary phone number;
  • Added the setting to autosync LDAP on schedule;
  • Added the possibility to give administrator rights to the user group at the portal via LDAP;
  • Updated the rules for LDAP users.

Version 2.5.1

Release date: 04/07/2018

LDAP

  • Fixed the Server internal error error when using the groups enclosed inside each other in the AD (bug #37414).

Single Sign-on

  • Fixed the issue when the user data between the Service Provider and the portal was transferred via HTTP only, even when HTTPS was enabled.

Version 2.4.0

Release date: 01/13/2018

Single Sign-on

  • Fixed the Invalid ssoConfig error which occurred when the link to the IdP contained the question mark '?', e.g.: IdP Single Sign-On Endpoint URL: https://accounts.google.com/o/saml2/idp?idpid=777777;
  • Fixed the Invalid authentication token error which prevented from adding a user to the portal using the AD FS, in case the + or - characters were present when sending the encrypted data.

Version 2.3.0

Release date: 12/15/2017

General

  • Added the changelog for Control Panel and link to it;
  • Fixed the bug when JWT parameters were not sent when updating Document Server(bug #36270);
  • Fixed the bug when Audit Trail heading was present at the login history page (bug #36026);
  • The current machine is now checked for being linked with the domain name for multiple portals.

LDAP

  • Fixed the bug with the LDAP Domain not found error which occurred if the DN record had no DC records (the users with Sun/Oracle DS were affected); now if the LDAP domain could not be specified, the LDAP domain will acquire the unknown value or the ldap.domain value from the web.appsettings.config configuration file;
  • Fixed the bug with the Sizelimit Exceeded error when trying to get more than 1000 users from the Active Directory;
  • Increased the login speed with the Group Membership setting enabled;
  • Added additional logging;
  • Fixed the bug with LDAP operation hanging when using Mono v5.2.0 and older;
  • Fixed the bug with the error when trying to login using the email address entered in the fields different from the Mail Attribute;
  • Fixed the bug occurring in the enclosed groups, when the users were displayed not in all groups.

Version 2.2.0

Release date: 10/31/2017

General

  • Added the documentserver-prepare4shutdown.sh script launch when updating the document-server for the correct edited document saving.

LDAP

  • Dramatically changed LDAP integration, migrated to the single library for the work with LDAP (Novell.Directory.Ldap.NETStandard, Nuget, MIT);
  • Login and email are now split into two separate fields;
  • Added the support for big data;
  • Increased the work speed via the LDAP protocol (the connection to the server and receiving the data is now made once per session, added the limits when only a certain number of results is necessary, fixed the slow login for bit data, removed the sorting out used to find the SID parameter);
  • Fixed the user re-creation issue;
  • Fixed the duplicate username issue;
  • Fixed the already existing email issue;
  • Replaced the LDAP user deletion with account deactivation (for further data migration and data safety);
  • Instead of re-creating a user with an unknown SID but an existing email the data is updated;
  • Added the attempt to save the correct UserName/Login in case a similar one is already taken on the portal.

Single Sign-on

  • Added the AD FS support;
  • Replaced the Single Sign-on link at the authorization page with the customizable button, added the button customization to the SSO setting of the Control Panel.

Version 2.1.0

Release date: 07/03/2017

HTTPS

  • Added the support of letsencrypt service for the domain certificate generation.

Single Sign-on

  • Added the new sso.auth service;
  • Added the new SSO settings page;
  • Added the support for Shibboleth.

Version 2.0.0

Release date: 05/25/2017

General

  • The Control Panel migrated from MVC to Node.js.

Version 1.6.0

Release date: 12/05/2016

LDAP

  • Added LDAP synchronization for users and groups when saving the settings, after login and using the Sync button;
  • Changed email formation for LDAP users;
  • Fixed the problem of creation of users with invalid emails;
  • Fixed the problem of duplicate users;
  • Added icons and hints to the users in the list for the admin;
  • Blocked for editing the user profile fields imported using LDAP;
  • Added the real LDAP password saving to the database during login in case LDAP Auth is disabled, now the LDAP users will become common portal users when LDAP Auth is disabled;
  • Added new API Settings method - Sync LDAP;
  • Added new translations;
  • Bug fixes.

Version for Windows

  • Made changes at the Update page for the Control Panel for Windows;
  • Updates are performed using the downloaded installation packages for each module.
  • The current installed component version numbers are obtained via API request to the Community Server.
  • The new versions available for download are obtained via the request to the https://download.onlyoffice.com/install/windows/updates.txt file, where all the latest component version numbers and links for their download are stored in the JSON format.

Introduction

By default, the portal data are stored on the local disk of the machine where Enterprise Edition is installed. You can also connect third-party services and use them as a storage for your portal data.

This can be done in the Storage section available in the Control Panel. To access Control Panel, sign in to your portal and click the 'Control Panel' icon on the Start Page. Alternatively, you can go to the portal 'Settings' and select the 'Control Panel' link on the left-side panel.

You can connect one of the following third-party services and use it as a storage for static data:

  1. Google Cloud Storage
  2. Amazon AWS S3
  3. Rackspace Cloud Storage
  4. Selectel Cloud Storage

It’s also possible to use a third-party service as a CDN (Content Delivery Network), i.e. as a distributed network that allows to speed up loading your portal data for users.

You can connect one of the following third-party services and use it as a CDN:

  1. Amazon AWS S3
  2. Selectel Cloud Storage

Connect third-party services in the portal settings

First of all, the necessary service (Amazon AWS S3, Google Cloud Storage, Rackspace Cloud Storage, or Selectel Cloud Storage) must be connected in the Integration section of the portal settings. Otherwise the corresponding storages will be disabled and grayed out in the Control Panel.

To learn more on how to do that, please refer to the Authorization keys option article.

Once the necessary service is connected in the portal settings, you can connect it in the Control Panel and use the connected service as a storage or CDN.

Connect a third-party service as a Storage

To connect one of the third-party services as a storage, switch to the Storage page in the Control Panel and use the Storage section.

If you have connected several storages in your portal settings, you can specify the data individually for each storage and store your portal data in the selected storage.

Storage page Storage page
  1. Select the necessary location of the Storage for your portal data:
    • the Disk Default option is selected by default. When the Disk Default option is selected, the CONNECT button is inactive.
    • select one of the available third-party storages. Once you select one of the third-party storages, the CONNECT button becomes active.
  2. When the necessary service is selected, specify the data to access it in the fields that appear below:
    • For the Amazon AWS S3 service, the following fields are available: Bucket (unique Amazon bucket name, e.g. my-new-test-bucket-12345) and Region (an AWS region where your Amazon bucket resides, e.g. us-east-2).
    • For the Google Cloud Storage service, the following field is available: Bucket (unique Google Cloud bucket name, e.g. test_bucket111419).
    • For the Rackspace Cloud Storage service, the following fields are available: Public container (Rackspace public container URL address), Private container (Rackspace private container URL address) and Region (a region where your Rackspace containers are located).
    • For the Selectel Cloud Storage service, the following fields are available: Private container (Selectel private container name, e.g. test_container) and Public container (Selectel public container name, e.g. test_container_public).
  3. Click the CONNECT button to connect the selected storage and save your settings.

Once the storage is connected, the page will be reloaded and the data migration process will start. This may take some time. When the data migration process is over, the Storage page in the Control Panel will be loaded with the connected storage selected.

The CONNECT button is inactive for the currently selected connected storage. If you change data in any field for the connected storage or choose a different available storage, the CONNECT button will be active again.

Connect a third-party service as a CDN

To connect one of the third-party services as a CDN, switch to the Storage page in the Control Panel and use the CDN section.

Storage page Storage page
  1. Select the necessary location of the Storage for your portal data:
    • the Disk Default option is selected by default. When the Disk Default option is selected, the CONNECT button is inactive.
    • select one of the available third-party storages. Once you select one of the third-party storages, the CONNECT button becomes active.
  2. When the necessary service is selected, specify the data to access it in the fields that appear below:
    • For the Amazon AWS S3 service, the following fields are available: Bucket (unique Amazon bucket name, e.g. my-new-test-bucket-12345), Subdir, i.e. a name of a nested folder within the Amazon bucket, e.g. testfolder and Region (an AWS region where your Amazon bucket resides, e.g. us-east-2).
    • For the Selectel Cloud Storage service, the following fields are available: Public container (Selectel public container name, e.g. test_container_public) and Subdir, i.e. a name of a nested folder within the Selectel container, e.g. testfolder.
  3. Click the CONNECT button to connect the selected storage and save your settings.

Once the storage is connected, the page will be reloaded and the data migration process will start. This may take some time. When the data migration process is over, the Storage page in the Control Panel will be loaded with the connected storage selected.

Download Host on your own server Available for
Docker, Windows and Linux
Ti potrebbe essere d'aiuto anche...
Chiudi